Rosand Series – High-Pressure Capillary Rheometers
High-pressure capillary rheometers for advanced characterization of material flow behavior under processing-relevant conditions from moderate to very high shear rates.
Inquire about this product:
The NETZSCH Rosand Series of high-pressure capillary rheometers provides advanced rheological characterization of materials under conditions representative of real industrial processes such as extrusion, injection molding, pumping, coating and spraying.
Unlike rotational rheometers, capillary rheometers can access the very high shear rates encountered during material processing, with the Rosand systems reaching shear rates of up to approximately 10⁸ s⁻¹, depending on the instrument configuration, die and barrel diameter.
The systems operate by controlled extrusion of the sample through a precision capillary die while measuring pressure, temperature and piston movement. This allows accurate determination of material flow properties under high pressure and high shear conditions.
Rosand rheometers are available as compact benchtop systems for routine research and quality control or powerful floor-standing configurations for demanding R&D applications. The range is suitable for a wide variety of materials including polymers, foods, coatings and ceramics.
The optional twin-bore configuration enables simultaneous measurements using different dies, allowing Bagley correction for absolute shear viscosity and determination of extensional viscosity using the Cogswell method.
Measuring Modes
Shear viscosity
Extensional viscosity
Shear stress
Extensional stress
Constant shear testing
Flow / no-flow testing
Non-Newtonian behavior
Wall slip analysis
Melt fracture and flow instability
Die swell
Material degradation and thermal stability
Stress relaxation
Melt strength
Pressure-Volume-Temperature (pVT) analysis*
*Depending on system configuration and accessories.
Specifications
Shear Rate
Up to approximately 10⁸ s⁻¹, depending on model, die and barrel configuration.
Temperature Range
RH2000: Ambient to 400 °C
Optional configuration up to 500 °C
RH7 / RH10: 5 °C to 300 °C
Low-temperature cooling option available
Maximum Force
RH2000: 12 kN standard / 20 kN optional
RH7: 50 kN
RH10: 100 kN
Bore Configuration
RH2000: Single or twin bore
RH7: Twin bore
RH10: Twin bore
Standard Bore Diameter
15 mm
Optional: 9.5, 12, 19 and 24 mm
Die Diameter
0.1 to 7 mm
Temperature Control
Better than ±0.1 °C
Pressure Transducers
Multiple pressure ranges available from 250 to 30,000 psi.
The complete model-dependent specifications are provided on the manufacturer’s technical table.
Accessories
RH2000, RH7 and RH10
Alternative test dies
Alternative pressure transducers
Nitrogen purge
Die and melt cutters
Laser die swell measurement
RH7 and RH10
Tragethon haul-off (melt strength)
Melt tension apparatus with automatic spooling
Slot die assembly
pVT test
Coextrusion die
Software
The Rosand Series is controlled through Flowmaster, a comprehensive Windows-based data acquisition and analysis software package.
Included analysis capabilities include:
Constant shear tests
Extensional tests
Non-Newtonian index
Bagley correction
Rabinowitsch correction
Hagenbach correction
Cogswell extensional viscosity analysis
Data visualization and export
Additional software options are available for wall slip analysis, melt fracture, die swell, material degradation, thermal stability and stress relaxation.
Dimensions
Rosand RH2000
Dimensions (Width × Depth × Height): 0.55 × 0.64 × 1.1 m (without accessories). Electronic box (Width × Depth × Height): 0.34 × 0.53 × 0.65 m
Weight: 120 kg (without accessories). Electronics box: 30 kg.
Power supply: Single phase, AC 230 V ± 10%, 50/60 Hz, 16 A.
Rosands RH7 and RH10
Dimensions (Width × Depth × Height): 0.78 × 0.9 × 2.45 m (with cable connected and fume extraction)
Weight: 350 kg (without accessories)
Power supply: 3 x 230 VAC (3P+N+PE) ± 10%, 3 X 16 A
Product Configurations
Rosand RH2000
Compact benchtop capillary rheometer for R&D and quality control, available in single- or twin-bore configurations, providing up to 20 kN force.
Rosand RH7
Floor-standing twin-bore rheometer for R&D and quality control, providing up to 50 kN force.
Rosand RH10
Floor-standing twin-bore rheometer for R&D and quality control for the most demanding high-pressure and high-shear applications, providing up to 100 kN force.

